deformation matrix
英 [ˌdiːfɔːˈmeɪʃn ˈmeɪtrɪks]
美 [ˌdiːfɔːrˈmeɪʃn ˈmeɪtrɪks]
形变矩阵
双语例句
- The deformation matrix method is a fast and available method to calculate surface deformation of connecting rod bearing bore.
变形（柔度）矩阵法计算连杆轴承孔表面变形快速、有效； - The changing regularity of the deformation and compliance of resin matrix composites with the fiber orientation has been discussed.
讨论了树脂基复合材料的柔度和变形随纤维方向的变化规律。 - Analysing the Effect of Axial Deformation of Column on Flexibility Matrix of a High-Rise Framed Structure
柱轴向变形对高层框架结构柔度矩阵影响分析 - By means of the deformation equations above, general matrix for program of solving the statically indeterminate beam was established, the sensitivity matrix and linear formulation of calculating the bearing load for variable stiffness shaft were deduced.
由变形方程得出静不定梁求解的求解矩阵，导出支承载荷计算的灵敏度矩阵和线性公式，并对回转窑进行分析和计算。 - Wear behavior of MMCs is characterized by plastic deformation of matrix in sliding direction along sub-worn surface. Al_2O_3 fiber can prevent matrix from plastic deformation and improve wear-resistance property effectively.
磨损亚表层中基体金属沿滑动方向的塑性流动是铝基复合材料磨损的基本特征，Al2O3纤维可有效地阻止基体的塑性流动，提高复合材料的耐磨性； - The deformation of matrix valued functions
矩阵值函数的形变 - Deformation Texture of β Matrix in Ti_3Al-Nb Alloy
Ti3Al－Nb合金中β相基体的变形织构 - Deformation of the porous matrix and the multiphase flow were analyzed.
采用这一有限元格式分析了任意倾角的孔隙裂隙岩体中井孔围岩的变形与岩体内部流体的流动。 - The deformation characteristics of the Ni-Ti matrix, Nb-rich phase, and oxides and carbides were determined.
确定了合金组织中TiNi基体相、Nb相及在晶界形成的氧化物和碳化物的形变特点。 - Deformation bands consist of matrix bands and transition bands, and the rotation is mainly developed in transition bands which consist of cell blocks and cells.
形变带由相互间隔的基体带和过渡带组成，形变造成的晶体转动主要集中在过渡带内，基体带由胞块及位错胞组成。 - The plastic deformation could promote matrix T1 precipitation and make it refined and uniformly distributed.
预变形促进基体T1相析出，并使其显著细化和均匀分布。 - The discussion of calculation of beam deformation by the transfer matrix method
传递矩阵法求梁的变形的探讨 - The acquired achievements are as follows: On the basis of the theories of solid deformation and solid surface energy, developing a coal matrix shrinkage model that indicates the effects of the deformation of coal matrix shrinkage on the porosity and permeability of fractures.
1基于固体变形理论与固体表面能理论，建立煤基质收缩或膨胀变形与煤裂隙渗透率和孔隙度关系的数学模型。 - On deformation of architecture matrix displacement method for double coordination of bending-twisting deformation of orthogonal beam system in frame construction
框架结构中的主次梁扭弯变形双协调的矩阵位移法 - With real cases calculating, analyzing and comparing, it is found that the model can reflect the effect of shrinkage and deformation of coal matrix on permeability and porosity of coal fractures properly and accurately.
最后，通过实例计算分析对比，模型能准确合理地反映煤基质收缩变形对煤裂隙渗透率和孔隙度变化的影响。 - Behavior of the ablative deformation of resin matrix materials at high temperature
树脂基材料的高温烧蚀变形 - Numerical results show that the whisker rotation induces a reduction in the whisker carrying load ability and influences the plastic deformation behavior of the matrix. Meanwhile, the composite exhibits significant strain softening during the hot compression.
数值结果表明：晶须转动不仅引起晶须承载能力的下降，而且也影响基体的塑性变形行为，同时复合材料在热压缩变形过程中表现出明显的应变软化行为。 - At high strain rate of loading, the damage mechanism of the high volume fraction particle reinforced SiCp/ Al composite associated with the fracture of the particles and the deformation localization of the matrix.
在高应变率压缩载荷下，无压浸渗高体积分数siCp/AI复合材料在增强相颗粒破裂的同时会出现局部化变形，材料的损伤行为与复合材料中的增强相颗粒尺寸密切相关。 - This paper introduces the fundamental principle and applied conditions on calculation of beam deformation by the transfer matrix method.
本文介绍传递矩阵法求梁的变形的基本原理和应用条件。 - Study on Plastic Deformation of Al Matrix Composites Reinforced by Al-Fe Intermetallics
Al-Fe金属间化合物原位增强铝基复合材料塑性变形的研究 - It is shown that the changes in fiber orientation and interfacial bond have great effect on the stress distributions and deformation characteristics of matrix.
研究表明，该类复合材料中基体的应力分布情况和变形特征将受到纤维位向改变和界面结合强弱的显著影响。 - A numerical study of tensile and cyclic deformation behavior of metal matrix composites
金属基复合材料单向和循环变形行为的数值模拟研究 - Influence of Deformation Temperature on Matrix Metal Flow and Whisker Re-orientation in SiC_W/ 6061Al Composites During Compressive Deformation
变形温度对SiCW/6061Al复合材料压缩变形期间基体金属流动和晶须重新取向的影响 - In the high-speed steel adhesion of TiN film is further improved, this is due to plastic deformation coordination of film and matrix ability and the result of the pinning effect of carbide.
TiN薄膜在高速钢上的膜基结合力进一步得到提高，这是由于深冷处理后薄膜与基体的塑性变形协调能力进一步提高，碳化物的钉扎作用所导致的。 - Motion compensation matrix reflects the geometric deformation, fuzzy coefficient matrix reflects the fuzzy, noise and other factors such as the impact of sub-sampling.
运动补偿矩阵反映的是帧间的几何形变，模糊系数矩阵则反映的是光学模糊、噪声及亚采样等其他因素带来的影响。 - In friction stir weld metal material is thinning of the joint action of heat-mechanical deformation severe of the matrix and the shear, the refinement of second phase carbide.
搅拌摩擦焊组织细化的机理是利用热-机械的联合作用通过基体的剧烈塑性变形和剪切作用来实现硬质第二相的细化。 - The mechanism of energy dissipation which includes voids and plastic deformation of matrix was studyed.
从空洞和基体的塑性形变能力两方面来定量地研究复合材料的能量耗散。 - The influence of the reinforcement size is considered through the deformation zone in the matrix and the introduction of a parameter to characterize the effect of interfaces.
通过对基体中变形区域的计算，考虑了增强体颗粒尺寸作用，并引入一个参数来表征界面对复合材料电导率的影响。 - With the deformation of the Ag matrix, Sn2 particles can insert continuously into the Ag matrix and finally accomplish the homogenous dispersion.
随着Ag基体的变形，SnoZ颗粒会不断的嵌入到银基体中，最终完成均匀弥散。 - Deformation models for matrix carbon with different texture degree were established.
建立了适合不同织构度基体炭的微观变形机理模型。